Electrical Installation Process And Considerations

All buildings will need electricity in order to operate equipment and lighting, and the installation of the electric system in usually performed while the building is still under construction. This gives the electrician a good opportunity to do the wiring before the building is completed so that the wiring can be hidden in the walls or floors which are still to be finished. Electrical inspections are required for compliance purposes, and only a qualified electrician can be used to install an electric system in any building. Constructions without electrical compliance certificates are considered unsafe for humans and are not allowed to be used or occupied until a compliance certificate has been obtained after prescribed changes have been made.

While the building was planned and the plans were drawn up, normally an electrician will be contacted to design an electrical system for that building. The design of an electrical system can be easy or complicated, and a suitable electrical design draughtsman is required to perform an effective design. Multiple documents must be provided, such as the electrical specification documents and the electrical system layout plans and maps which specify what the system is supposed to do, and how it is connected. It must also indicate where all the systems and subsystems are.

Once the electrician has arrived on site they start to lay the wiring and connections to the power sources. There are a lot of factors to take into consideration here. These include:

Safety: The appropriate safety clothing and electrical gear have to be used while performing any electrical construction. All wires must be earthed and adequate safety measures in terms of the current must be taken. Safety is not also important on-site, but also in the construction of the electrical system and the long term use of this system. The wiring must be laid in such a way to make it invisible and safe for the occupants of the building.
Voltage issues: The equipment such as switchgear and wiring must be installed according to the voltage required in the building. Protection against overflow must be built-in and trip switches installed to cut the power supply once something goes wrong with the circuit.

Our Areas in Southern Suburbs

Our electricians are all licensed, qualified, and ready to provide prompt professional service and attention to detail. We deliver the highest quality workmanship and technical knowledge to meet your expectations.

The Need For Electrical Installations

Fully qualified electricians do electrical installations; the law does not permit an unqualified person to perform these functions due to the danger involved. Many people have lost their lives or have been injured by sheer negligence and ignorance. Electrical wiring is a specialized field and best left to the experts.

Electricians who have installed or inspected electrical wiring in a building, must be able to sign it off as correct and they can only do so if they have obtained the necessary qualifications. They are however not only involved in the wiring of buildings but also work on machines and other electrical equipment.

Electrical installations and the maintenance thereof are important if you want continued power in your house, office, shop, or business. As things stand, outages occur in South Africa from time to time and people are often left without power when cables are stolen or when lightning strikes. Households have become very dependent on the availability of power; the lights are run with it, as well as fridges, televisions, and computers. Garage doors and entrance gates are automated and dependant on a constant power source.

In an office environment, all the faxes, printers, elevators and cash registers need electricity to keep the operation running. Staff cannot charge cell phones and other electronic equipment and batteries do not last forever. During an outage many shops close their doors because they cannot control their security; the lights go down, the tills do not work and security cameras do not function. The shop owner is at risk of theft.

The installation of lighting in towns and cities reduces the risk of crime and personal attacks. Lighting has certainly made life easier on many fronts; people can work after the sun has set and hospital personnel can carry on with essential services such as emergency operations and treatments.

Industrial and commercial operations in airports and harbours continue for the benefit of countries and employees. Electric gates open and close on a 24 hours basis as trucks come and go with their cargo.

Safe, Reliable Electrical Installations

Electrical wiring or electric installation is the web of connections, wires and pipes that allow for the flow of electricity. Electric installations are the reason appliances can be turned on at the touch of a button. Many of the appliances, gadgets and devices that we use every day would be totally useless without electric installations to power them. Electrical wiring is vital in draining electric power from the municipal system to residential and commercial sections.
Many people consult electricians before they embark on construction and renovation projects. Electricians make sure that the electrical installations are considered when drawing up house plans and during the construction work. They consider the size of the building, determine the potential electricity demand on the circuit and they wire the connections to cater to that demand. The best electricians are responsible for all the labour that is associated with installing electrical wires. As such, they have knowledge of the required materials and are best equipped to compare prices. They also have relationships with product and material suppliers who are known for affordable, quality products.

A career as an electrician can be very fulfilling and lucrative if the student is eager and determined. Interested people can take a variety of courses that offer a theoretical foundation and a very important practical component to help budding electricians gain experience. It helps if the electrician is mathematically inclined and can pay attention to detail. Electricians must be able to interpret drawings and translate them into reliable electrical connections.
Minor electrical wiring projects such as fixing small appliances and simple circuits are enjoyed by DIY enthusiasts. Such projects are easily managed if relevant safety measures are considered and instructions are followed precisely. People must not take chances where electricity is concerned. If there is any uncertainty during execution of the electric wiring, then it is better to call on a qualified electrician before proceeding. Work on electric installation, or any other electrically powered appliance or device, must not be attempted with wet hands or carried out in a wet or damp environment.

A Basic Guide To Electrical Installations

The term electrical installation means any fixed appliances, wires, fittings, apparatus or other electrical equipment that uses, controls, moves, or conveys the flow of electricity. Electrical installation draws power straight from the electrical supply and not a plug outlet. Electrical installation is specialized construction work that is usually done during the construction or reconstruction of a building.

An electrical engineer or electrician knows how to install electrical circuitry in a manner that accommodates all legislation and regulations. The government or specific institutions usually set down these legislations or regulations. Tests are also done before, during and after installation that will allow the best possible quality of materials and workmanship to be produced for the client.

Whether you are looking for electrical construction or electrical maintenance finding an installer is a complex process. Check for credentials, references and legal certification and shop around for quotes. Make sure that the installer has been in business for while as this generally means that you can rely on their delivery guidelines. Before settling on one installer you as the client must feel comfortable with both the cost, the delivery schedule and process that is going to take place.

There are specific electrical installation requirements that must be fulfilled by the installer and maintained by the client. Standards are based on the relevant IEC guides. Medical and engineering experts from all over the world determined IEC 60364. These safety principles have now been adopted all over the world.

One of the main elements of electrical installation is the power demand that the electrical installation works from. The total power demand is calculated from data about location and power of each load, and operating modes. From this information the power supply necessary will be obtained. The next step is the service connection with the either a medium voltage level or a low voltage level.

The entire electrical system is studied and installed as a complete system and the installer (whether they are electrical engineers or electricians) will create electrical distribution architecture to make sure that you are receiving the best quality product and best installation that will last for a long period of time.

Interior Lighting Has A Voice

Interior lighting of any room in the house speaks to exactly what purpose the room is used for, an example would be that the interior lighting of a bathroom would generally be different to that of a lounge. For several reasons, since there is a lot of water usage in a bathroom the light will not be placed directly above a shower because when you are have a warm shower the steam will rise up directly to where the lighting is mounted. In the case of a lounge you will probably have lights directly above the coffee and all around the lounge because of the size of the lounge and where there television screen is going to be mounted or place it in order to prevent a glare on the TV screen. In the case or a dress room for a stage play the interior lighting will be specifically around the mirror so that when the makeup artist is making up the actor or actress they have light coming from all angles in order for them to perfect their work for the audience.

When it comes to some households chandeliers are very popular this is often in case of a house that has a high ceiling. Where somebody has built a home from scratch and actually designed it themselves it would be wise to consult an electrician before consulting an interior designer, for the obvious reason that interior designers do not have a clue about household or building electrical wiring. So the electrician would actually place the lights where you want them in each room and the interior designer will have a catalogue or presentation for you look at and place orders for the designs which suit your interior lighting design that you want for your household, office, shop or even showroom.

Designs are also available online from what is known as online catalogues, where you will also be exposed to track lighting basics which is easier to install even when one is remodeling their home. So it will be good to research widely on the internet for the best prices as all these wonderful materials come at a price.

The Process Of Building a House

Building your own house can be very exciting. This is mainly because you will be able to draw up plans and watch your dream become a reality. It also gives you the satisfaction of having achieved something because building your own house is not an easy feat. Even though you will have a construction company doing the actual building, there are logistical issues that you will need to be involved with such as hiring electricians and plumbers for the house.

The first step towards the building of a house is finding a location. If there is an area that has been set aside for the building of houses, this should be the first place you should consider building your own house. This is because such an area has already been approved by the authorities as being suitable for building homes and living on. If there is another location you would prefer, then you should consult with the local authorities to make sure that the area is suitable for building a home so that you do not experience any problems of an illegal building in the future.

After finding a location, the building plans need to be drawn up. Getting a professional to help you draw the house plans is very important. This is first because they will help you come up with something realistic and more importantly something that will be approved by the housing authorities. The building plans should be something that will not compromise the structure and construction quality of the building.

After the plans have been drawn up, your next step would be to find a good construction company to start on the building of the house. You should do a lot of research on the various construction companies available in the area. You need to ensure that you hire someone who is reliable, honest and professional. This is very important so that a shoddy job is not done and that materials of the highest quality are used. In addition, the electricians and plumbers you hire should also be very professional so that a good job is done.

Atlantic Seaboard . City Bowl . Northern Suburbs . Southern Suburbs . West Coast

The Benefits Of Electrical Design

Electrical design is very important for the flow of any building. It ensures that the electrical cables are kept out of people’s way. This ensures that they are not put in danger by exposed wires and cables. Electrical design has been developed in such a way that you cannot see any wires or cables at all. This gives any building a free flowing feel that is not affected by unsightly cables.

Most electrical wires are installed along the walls of the building. This means that as the building is being built, the electric wires will be run along the walls before the plaster is put on and the walls painted. There are some situations in which the electricity wires are not hidden behind a plaster of walls. It makes more a neater look and only the plug points will be visible. Even these can be designed in such a way that they add to the beauty of the wall and not become an unsightly addition.

Some people may choose to have walls in which the bricks are exposed. This means that the electricity cables cannot be hidden behind any plaster. In such a case, the electrical wires are neatly gathered and run along the top or the bottom of the wall. The wires can also be hidden behind a casing which can be placed along the wall as well. This situation, however, will require longer wires as they have to come up from the source and go up the wall and then down to the plug, as compared to wires behind a plaster that can just continue running along the wall at the same level as the plug.

You can do your research on electrical design so that you can be aware of the options you have. Knowing this information also ensures that you know what the electricians are talking about when they explain things to you. In addition, you will be able to know what you can and cannot do based on the regulations set by the government. This will ensure that you are not doing anything illegal or something that will be dangerous.

Professional Electrical Installation

Electricity has been around for many decades now and it has become an everyday part of our lives, even though there are millions of people in the world that do not have electricity where they live, the rest of us have the privilege of having access to electricity. Our lives rely on electricity in order for us to be able to do anything like take a warm bath through to mowing our lawns.

Despite electricity being to useful to us, it can also be very dangerous if not handled properly. Having your electricity installed by a professional electrician is, thus very important. Having live wires around the house is very dangerous and you would be putting yourself and your family in danger. Having the electricity in your home installed properly will go a long way in ensuring that no live wires are left lying around or that there are no short circuits.

Normally, people that need to have electricity installed in their house are people that are in the process of building a new house. This means that there will be a lot going on at that time and so, the electrical installations are done professionally. It is important that you do some research on electrical installation so that you understand what is going on when the installations are done. This way you will be aware of any shoddy business and not be duped into spending more money that you should be.

The installation of electricity is also sometimes done by people that want to have electricity in a barn or a cabin in the woods. These are times when you will need to have electricity fed from the main electricity box and down to the barn or cabin. Such a job may require permission from the city’s council and so, you should find out how to go about it. Getting information from the council will ensure that you install the approved amount of electricity for the area and the type of building. In addition, they would need to come and inspect the installation and make sure it is up to standard.

Plumbing And Eectrical For Your Home

The modern conveniences that we have are something that we only appreciate once we no longer have them. If you find yourself in a situation in which the electrical power has been cut off for whatever reason, you will be very frustrated as you realise all the things you cannot do because there is no electricity. The same goes for our plumbing. Being able to simply go to a sink and open a tap in order for you to have water is something that many of us take for granted. This is why it is important that we maintain these necessities and ensure that they are working properly at all times.

Plumbing is very important and you would need it for bringing water into the home and out of the home. With this in mind, you would need the plumbing to be suitable for the area in which you are putting it in. If the plumbing has to go up a slope, for example, this presents a challenge that a professional plumber can overcome. It is because of such situations that you would need a professional plumber to install the plumbing. This is very important so that you do not have to deal with low pressure water because the plumbing was poorly installed.

Electrical installations also need to be made by a professional. This ensures that the electricity is installed properly. Electricity can be very dangerous and so, it should be installed in such a way that it adheres to the rules and regulations of electricity use and installation. A professional electrician will be aware of all of this and so, they will ensure that the installation is up to standard.

You should also do your own research on electrical and plumbing installation. This way you will be aware of what should be happening and the things to look out for in order to know if things are going according to plan. This information would be very empowering and will give you an opportunity to note if something is wrong. You can find out this information by searching the internet for it.

No Hot Water

No hot water is the ultimate nightmare especially when one discovers this when it’s time to get up and go to work, the first point you should check is the distribution board which is the electric board to check if the switch for the geyser is up or down. If the switch is down this your geyser has not been heating up the water at all while you were asleep so it is very advisable to push it up and wait for about thirty minutes for the water to warm up, should happen that the switch drops down immediately after pushing it up it means that there is an electrical fault on your geyser that needs to be fixed. Next question is “ who do you call “ an electrician or plumber? Generally the plumber has the knowledge of any geyser problem so calling a plumber would be best.

Please bear in mind that there should be a faulty part in the geyser which the plumber must to see what it is and bill you for it. You will also be billed for labour to fix your no water problem, to given an idea of what the parts of the geyser are the thermostat which regulates the geyser’s temperature, this thermostat is not to be confused with the found in car’s engine. Since today everybody is claiming to go green and being environmentally friendly people who have no hot water are getting solar panel geysers installed for free at these RDP houses built by government, the good thing is that the geysers actually last longer than the actual houses themselves.

The other factor that could be the cause of having not hot water is the pressure valve this is made to take water from the main pipeline system to the geyser, when the valve does not work or is faulty the hot water will no longer be hot or the pressure will be too low or there will no hot water at all. No hot water is real problem especially when you have lived your life waking up to hot water everyday and when it is not there anyway it will feel like the end of the world however it is not, it is just a problem that has a solution if you contact the right perons.

Contact Office 082 098 4113 (8am – 4pm : Mon - Fri)

News